Site Cuts to Set Levels
We cut and bench to the levels on your plans, then check them, so the slab, paving or retaining that follows is not chasing a surface that is 50mm out across the pad.
Accurate site cuts, footing trenches, pool digs and driveway box-outs, dug to level by operators who understand what gets built on top.
Excavation sets the level that everything above it inherits. Cut too shallow and your paving sits proud of the door threshold; cut too deep and you are buying imported fill to bring it back up. We work off set levels rather than by eye, so footings, slabs, pools and driveways start from ground that is where the plans say it should be.
Perth Pavers takes on residential and light commercial excavation across the metro area - site cuts for new builds and extensions, footing and service trenches, pool excavations, and box-outs for driveways and hardstands. Our sandy soils dig easily but hold edges poorly, so we batter and stabilise the cut as required rather than leaving faces that slump after the first heavy rain.
Get a Free Quote
For Excavations and related paving inquiries in Perth and nearby suburbs.
From a single footing trench to a full site cut, the work is scoped around access, soil and the levels the next trade needs.
We cut and bench to the levels on your plans, then check them, so the slab, paving or retaining that follows is not chasing a surface that is 50mm out across the pad.
Straight, correctly sized trenches for footings, stormwater, power and irrigation, dug with services located first and spoil placed where it will not obstruct the run.
Pool digs shaped to the shell profile with access, spoil cartage and surrounding structures planned before the machine turns up, which is what keeps a tight suburban block workable.
We build on the ground we dig, so the excavation is set up for the paving, drainage and retaining that come next rather than handed over as someone else's problem.
Excavation is planned before it is dug, which is what keeps sites safe and levels honest.
We review plans, take levels, check soil conditions and confirm access, then work out what plant fits and how spoil will leave the site.
Underground services are located and marked, the dig is set out with pegs and string lines, and edge protection or batters are planned where the cut is deep.
We excavate to the set levels, keeping the base clean and batters stable, and load spoil straight out where there is no room to stockpile it.
Final levels are checked, the base is compacted where the next stage requires it, and the site is handed over ready for footings, paving or the pool shell.
Excavation rarely stands alone - drainage, retaining and paving usually follow straight behind it.
Build from the ground up with site preparation, excavation, levels and drainage support for driveways, paving, asphalt and retaining wall projects.
View serviceStabilise slopes, create usable levels, reduce erosion and frame driveways or gardens with retaining walls designed around your site conditions.
View serviceSturdy, good-looking brick fences and boundary walls built to suit your home — from front boundary fences to private side and rear walls.
View serviceSend your project address, approximate area and preferred timeline. We will help you map out the next practical step.
Common questions about excavation work on Perth properties.
It depends on the narrowest point of access. A 1.7-tonne mini excavator fits through most standard side gates, while larger machines need open frontage or fence panels removed. We check access at quoting and match the plant to it.
Always. We run Dial Before You Dig enquiries and locate and mark services on site before any machine starts, and hand-dig around known service runs where the plans indicate them.
Spoil can be spread and levelled on site where there is somewhere useful for it, or carted away. Cartage is priced on volume, so we confirm which way you want to go before we start.
Yes. We excavate pool shells to the profile supplied by your pool builder, including planning spoil removal and access on tight blocks where the machine has to work around the house.
It depends on the surface and the traffic. A residential paved driveway needs enough depth for a compacted base plus the paver and bedding sand, while driveways taking heavy vehicles need a deeper box-out. We set the depth against the finished surface level.